2026-11-10

An admin buyer's argument for total value over unit price in medical equipment procurement, from imaging contracts to dental X-ray machines and hemodialysis service.

The lowest quote is not the lowest cost

My rule after six years of managing medical equipment and service orders: if two vendors are 30% apart on price, the cheaper quote is usually missing something. That is not a clever procurement slogan. It is how I avoid explaining to finance why a bargain turned into a repair bill.

I am the office administrator for a 240-person multi-site clinic group. I manage facilities and clinical equipment ordering—roughly $1.8 million annually across 14 vendors. I report to operations and finance. I do not choose clinical protocols. I choose the process that gets the right equipment, parts, and service into our sites without creating a bigger problem.

That is why I come down on the value side of the value-versus-price argument. Price is visible. Value is what you have to dig for. And in medical equipment, the digging is the job.

What the invoice does not show

Most buyers focus on the unit price and completely miss installation, freight, training, service contract terms, consumables, and downtime. The question everyone asks is what is your best price. The question they should ask is what is included in that price.

A simple example: a dental X-ray machine quote can look clean on paper. Then you find out the installation requires a room survey, shielding review, calibration, and a service plan that starts after 90 days. The unit is not the cost. The unit plus the first year of ownership is the cost.

The same logic holds for a cardiac stent line item. A cardiac stent purchase is not just a unit price. It is lot traceability, expiry, consignment terms, recall response, and whether the clinical team can get the size it needs on a Friday afternoon. If a low-cost supplier cannot answer those questions, the low price is incomplete.

And when a colleague asks how does hemodialysis work, the clinical answer is about filtering blood. The procurement answer is about water treatment, machine uptime, consumables, and service response. A dialysis unit that waits 10 days for a part is not cheap. It is expensive in a different column.

Market signals are not buying decisions

I watch market results because they tell me where vendor support is heading. The GE Healthcare Q3 2024 imaging division results are a useful reminder. According to GE HealthCare's Q3 2024 earnings release (gehealthcare.com, October 30, 2024), the Imaging segment reported about $2.6 billion in revenue, with continued demand for premium and AI-enabled systems. That does not tell me which machine to buy. It tells me that software, applications support, and service depth are part of the product, not an accessory.

Regional presence matters for the same reason. GE Healthcare Vietnam is a good example of why I ask where the field service engineer actually sits. A logo on a quote is not a service network. If the local entity or distributor cannot show parts availability and response times in writing, I treat the quote as incomplete. That is not a knock on any brand. It is a question every buyer should ask.

I have watched this pattern play out. The numbers said go with Vendor B—15% cheaper with similar specs. My gut said stick with Vendor A. I went with my gut. Later I learned B had reliability issues I had not discovered in my research. That is not a scientific sample. It is one reason I now score service terms before I score price.

The budget objection is real, but incomplete

Finance will push back. I get it. The invoice is concrete. The avoided downtime is not. But budget math that ignores rework is not conservative. It is optimistic.

The lowest quoted price often is not the lowest total cost.

I use a simple total cost of ownership check: base price, setup and installation, shipping, training, service contract, consumables, expected downtime, and reprint or replacement risk. I do not need a perfect model. I need to stop comparing a full quote to a stripped quote.

In 2024, we consolidated orders for 400 employees across 3 locations. Using a single ordering workflow cut our processing time from about 9 hours a month to 3 hours and eliminated the duplicate invoices we used to chase. The savings were not dramatic. The reduction in rework was. That is the kind of value that never shows up in a unit price.

I also have a scar. In 2021, I found a great price from a new vendor—$3,200 cheaper than our regular supplier. I ordered six units for our satellite clinics. They could not provide a proper invoice, handwritten receipt only. Finance rejected the expense report. I ate $2,400 out of the department budget. Now I verify invoicing capability before placing any order. The lesson was not that cheap is always bad. The lesson was that a vendor who cannot handle the boring paperwork will eventually cost you more than the discount.

My sample has limits

I do not have hard data on industry-wide defect rates. My sense from 60-80 orders a year over five years is that quality or documentation issues affect maybe 8-12% of first deliveries. That is an estimate, not a benchmark. I wish I had tracked it more carefully from the start.

My experience is also based on mid-sized clinic equipment and service contracts. If you are buying for a large hospital system, a single private practice, or a market outside Vietnam, your numbers might differ. I cannot speak for every category. I can speak for the process I use.

What I do now

I ask three questions before I compare price. What happens after the sale? Who is responsible when a part fails? And what does the vendor need from me to keep the invoice clean?

If a supplier cannot answer those questions, I do not reward the lowest number. I go back and ask for a complete quote. That is the value-over-price argument in practice. It is not about paying more. It is about refusing to compare incomplete offers.

The cheapest option sometimes wins. But it should win after the total cost is on the page, not before. That is the difference between a low price and a good decision.

Mikkel Sorensen

Mikkel Sorensen is a rehabilitation and patient-handling equipment analyst covering power wheelchairs, manual wheelchairs, hospital beds, patient lifts, transfer aids, mobility scooters, prosthetic components, and orthotic systems. He references the ISO 7176 series and IEC 80601-2-52 while assessing static stability, braking, fatigue strength, turning space, safe working load, entrapment zones, battery range, actuator duty, and postural adjustability. His work assists rehabilitation clinicians, care facilities, biomedical teams, and buyers with fit, transfer safety, accessibility, maintenance, durability, and fleet planning.